Not a Video Drive

Product: Flyer

Platforms: 2000 3000 3000T 4000 4000T

This can occur if drives are not fully ready when the system binds in the DOSDrivers for the Flyer Drives, or executes FlyerInit. This is common if the drives are housed in the computer hosting the Flyer, or if the user powers up all equipment from a single switch on a power strip. If the drives are in a separate housing, power them up before the Flyer system.

If the drives are housed in the same system as the Flyer, then you may need to do a warm boot after the system has powered up the first time, or you may wish to put a "Wait" command in the Startup-Sequence to create a delay of 20 or 30 seconds just after the "SetPatch" command.